J-Log.eu - Forum

Hi folks,

I have the same problem as is described here:
http://j-log.eu/forum/viewtopic.php?f=24&t=1032

I have no telemetry after upgrade the Kosmik firmware to 4.13 or 4.12 and jlog 2.6 firmware to 26-K_Fc-43.123.bin. What I was try to do (but without succes):

1.I tried to register sensors to transmiter again (communication error)
2.I was used kontronik sensors on transmiter from slot 8 and from slot 16 (as it works with kontronik telme) - no telemetry
3.I was change cable.

I am not able to register sensor still. I not tried 26-K_Fc-43.122_kwa46.bin on jlog yet,

Thanks for any solution or inspiration for troubleshooting of those problems.

You should check if there are files on the SD card. My 2.6GW changed to a 2.6LO. Will try to update another 2.6 full after holiday.

Cheers
Nils

Hallo Nils,

Thank you for your answer. I'll check the version of my Jlog today evening and I'll let you know. I am pretty sure, that my Jlog generate log files to SD card, I am not sure if GW version it should do it. Did you solve the problem with change version of Jlog already? If yes, could you tel me how?

I have once more heli with Kosmik and Jlog 2.6 GW, but I don't want to upgrade it until those problems will solved.


Thanks
Maros.

Hi

GW is for telemetry only and generates no files normally. I still contacted Tom and hopefully he can identify the reason for it.

Cheers
Nils

So it seems, that I have the same issue as you. I'll wait for Tom solution of the problem then. Please let me know, when you will have running GW jlog .

Thanks

I am checked the files right now. I have exact the same situation as you Nils. In version.txt is ID with letter "G" - gateway version, but logs are in d000-510 folder. It works as Log Only jlog even though license seems to be for GW.

Oops oops oops! Will check!

_________________
Tom

Hallo Tom,

Is there any progress regarding this problem? Thank you very much in advance.

I was try to use 26-K_Fc-43.121.bin and set up poles, pinion and main gear at j-log. It works with kosmik 4.12:-)

You should use 4.13. Your Firmware has a shutdown issue. If it works there I will downgrade also.