J-Log.eu - Forum

Hello,

I have a question.

I am using the following setup:

ESC: HeliJive 120+HV
Motor: Pyro 700-45L

Motor Pinion: 13T
MainGear: 110T

Battery: 12S

Logger: S32_2

Further information:

TRX: Frsky Horus X10S with OpenTX 2.2.2


The HeliJive is programmed with mode 4.

The S32 Logger is programmed with
Motor: Pyro 700
ESC: Jive/HeliJive
Pinion: 13T
MainGear: 110T

With throttle at 85% the S32 logger logs RPM speeds of 2400-2500Rpm
I find that a bit high also the sound coming from the Heli doesnt sound like that kind of RPM's
I could be very wrong, but I have my thoughts about this.

Any Experience with this setup?

The Logger is connected to the SmartPort of my Frsky X8R receiver.
The plain RPM's are double that of the S32 logger itself.
I had to set the blade number to 2 in the Telemetry setup page of the RPM sensor to get the same RPM reading as the S32 logger.