J-Log.eu - Forum
http://j-log.eu/forum/

Jlog 2.6 +Kosmik +Futaba T14SG
http://j-log.eu/forum/viewtopic.php?f=25&t=1034		 Seite 1 von 2
Autor:  maros [ 25. Apr 2018, 06:24 ]
Betreff des Beitrags:  Jlog 2.6 +Kosmik +Futaba T14SG
Hi folks,

I have the same problem as is described here:
http://j-log.eu/forum/viewtopic.php?f=24&t=1032

I have no telemetry after upgrade the Kosmik firmware to 4.13 or 4.12 and jlog 2.6 firmware to 26-K_Fc-43.123.bin. What I was try to do (but without succes):

1.I tried to register sensors to transmiter again (communication error)
2.I was used kontronik sensors on transmiter from slot 8 and from slot 16 (as it works with kontronik telme) - no telemetry
3.I was change cable.

I am not able to register sensor still. I not tried 26-K_Fc-43.122_kwa46.bin on jlog yet,

Thanks for any solution or inspiration for troubleshooting of those problems.
Autor:  augur [ 26. Apr 2018, 08:51 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
maros hat geschrieben:
Hi folks,

I have the same problem as is described here:
http://j-log.eu/forum/viewtopic.php?f=24&t=1032

I have no telemetry after upgrade the Kosmik firmware to 4.13 or 4.12 and jlog 2.6 firmware to 26-K_Fc-43.123.bin. What I was try to do (but without succes):

1.I tried to register sensors to transmiter again (communication error)
2.I was used kontronik sensors on transmiter from slot 8 and from slot 16 (as it works with kontronik telme) - no telemetry
3.I was change cable.

I am not able to register sensor still. I not tried 26-K_Fc-43.122_kwa46.bin on jlog yet,

Thanks for any solution or inspiration for troubleshooting of those problems.


You should check if there are files on the SD card. My 2.6GW changed to a 2.6LO. Will try to update another 2.6 full after holiday.

Cheers
Nils
Autor:  maros [ 27. Apr 2018, 08:45 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
Hallo Nils,

Thank you for your answer. I'll check the version of my Jlog today evening and I'll let you know. I am pretty sure, that my Jlog generate log files to SD card, I am not sure if GW version it should do it. Did you solve the problem with change version of Jlog already? If yes, could you tel me how?

I have once more heli with Kosmik and Jlog 2.6 GW, but I don't want to upgrade it until those problems will solved.


Thanks
Maros.
Autor:  augur [ 27. Apr 2018, 13:14 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
Hi

GW is for telemetry only and generates no files normally. I still contacted Tom and hopefully he can identify the reason for it.

Cheers
Nils
Autor:  maros [ 27. Apr 2018, 13:32 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
So it seems, that I have the same issue as you. I'll wait for Tom solution of the problem then. Please let me know, when you will have running GW jlog .

Thanks
Autor:  maros [ 27. Apr 2018, 19:07 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
I am checked the files right now. I have exact the same situation as you Nils. In version.txt is ID with letter "G" - gateway version, but logs are in d000-510 folder. It works as Log Only jlog even though license seems to be for GW.
Autor:  dl7uae [ 28. Apr 2018, 01:34 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
Oops oops oops! Will check!
Autor:  maros [ 3. Mai 2018, 09:16 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
Hallo Tom,

Is there any progress regarding this problem? Thank you very much in advance.
Autor:  maros [ 7. Mai 2018, 16:18 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
I was try to use 26-K_Fc-43.121.bin and set up poles, pinion and main gear at j-log. It works with kosmik 4.12:-)
Autor:  augur [ 8. Mai 2018, 09:26 ]
Betreff des Beitrags:  Re: Jlog 2.6 +Kosmik +Futaba T14SG
You should use 4.13. Your Firmware has a shutdown issue. If it works there I will downgrade also.
Seite 1 von 2 Alle Zeiten sind UTC + 1 Stunde
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/