J-Log.eu - Forum
http://j-log.eu/forum/

jlog 2 no work
http://j-log.eu/forum/viewtopic.php?f=6&t=394		 Seite 1 von 1
Autor:  erotel [ 4. Jul 2013, 20:10 ]
Betreff des Beitrags:  jlog 2 no work
HI.I have the same problem http://jlog.hacknet.eu/forum/viewtopic.php?f=4&t=213
what is the solution.
I have JLOG2 SBL3SPEK.

I tested the jive in old JLOG2 and work fine.

Dateianhang:
CONFIG.txt [123 Bytes]
880-mal heruntergeladen


Dateianhang:
JIVEinfo.txt [6 Bytes]
877-mal heruntergeladen


Dateianhang:
version.txt [24 Bytes]
871-mal heruntergeladen


Dateianhang:
log00049.txt [74 Bytes]
892-mal heruntergeladen


video http://www.youtube.com/watch?v=DyMx65dCNUI&feature=youtu.be

Sorry my english
Autor:  dl7uae [ 4. Jul 2013, 20:27 ]
Betreff des Beitrags:  Re: jlog 2 no work
Well.. how does a log file look like? Empty?

Your video: SPEKTRUM telemetry (TM1000) is not connected.
No twinkling green LED.. Means, JLog does not see data running in from the JIVE.

Three reasons are thinkable:
- Broken servo patch cable. --> Try another one.
- JIVE have been started with a jumper in the diagnostic port (not the case here).
- Strong deviation of the JIVE's baud rate (diag port). --> Play with Emergency->Baudrate Correction in JLC.

Okay, the log file is empty except of the null record.

Of course.. Also JLog may be damaged. Did it ever run?
Autor:  erotel [ 4. Jul 2013, 20:36 ]
Betreff des Beitrags:  Re: jlog 2 no work
dl7uae hat geschrieben:
- Broken servo patch cable. --> Try another one.


I did.the same behavior

dl7uae hat geschrieben:
Of course.. Also JLog may be damaged. Did it ever run?


not run.I bought it today.

friend has an older piece JLOG2(not SBL3SPEK) and it works
Autor:  dl7uae [ 4. Jul 2013, 20:43 ]
Betreff des Beitrags:  Re: jlog 2 no work
Zitat:
friend has an older piece JLOG2(not SBL3SPEK) and it works

Well, SBL3SPEK has nothing to do with that. It's a modification in the bootloader which grounds SCL for a while to delay the I²C bus, the sensor scan by the TM1000.

Now I can really only conclude that this JLog has a defect.
Nyní mohu opravdu jen konstatovat, že tato JLog má vadu.
Autor:  erotel [ 4. Jul 2013, 20:49 ]
Betreff des Beitrags:  Re: jlog 2 no work
thanks for the support.
send seller to exchange
Seite 1 von 1 Alle Zeiten sind UTC + 1 Stunde
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/